Showing posts with label Harley davidson. Show all posts
Showing posts with label Harley davidson. Show all posts

Monday, February 6, 2012

HARLEY DAVIDSON INSTALLATION MANUAL BILLET SHIFTER PEG

Kit Contents See Figure 1 and Table 1. INSTALLATION 1. Remove and discard the original equipment shifter peg. If needed, use a heat gun to apply heat to the shift lever and shifter peg threads to aid in peg removal. 2. See Figure 1. Insert the screw through the peg into the shift lever. Tighten the screw to 11-15 ft-lbs (15-20 Nm) . -J04379 1 of 2 SERVICE PARTS 1 2 B C 1 2 3 1 2 3 A is05070 Figure 1. Service Parts: Billet Shifter Peg Kits Table 1. Service Parts Table Part Number Description (Quantity) Item A – Kit 49256-99 3396 Screw,
Read more »

HARLEY DAVIDSON INSTALLATION MANUAL FRONT NINE-SPOKE WHEELS

INSTALLATION  HARLEY DAVIDSON MANUAL  1. Remove existing front wheel assembly. Save axle, axle nut, brake disc, and wheel spacers for kit installation. Refer to FRONT WHEEL in service manual. For FLSTC and FLSTN models: Discard moon-style hub cap. Do not re-use brake disc screws. Re-using disc screws can result in torque loss and damage to rotor and/or brake assembly. (00319b) 2. See Figure 1. Install valve stem assembly (D) on wheel. Refer to TIRES in service manual. 3. Assemble wheel installation kit components and brake disc(s) to wheel, using the appropriate service parts table. Refer to FRONT WHEEL in service manual. NOTES Install the primary bearing first with the WHEEL BEARING REMOVER/INSTALLER, following the service manual instructions. The machined grooves in the hub face indicate the primary bearing side. The front wheel should be installed so that the valve stem is on the right side of the motorcycle. 4. Install wheel assembly parts from the appropriate service parts table for your fitment and stock brake disc(s). Discard parts from the installation kit that are not required. Refer to FRONT WHEEL in service manual. 5. For FLSTC and FLSTN Models: Install wheel kit and right side wheel spacer
Read more »

HARLEY DAVIDSON USER MANUAL HALF HELMET STEREO HEADSET KIT/ AUDIO CABLE CONNECTION OPERATION

AUDIO CABLE CONNECTION USER MANUAL 1. See Figure 3. Obtain the larger clip (4) and the coiled headset audio cable (2) from the kit. Install the 3.5 mm stereo jack end of the cable into the clip. 2. Connect the 3.5 mm stereo jack from the headset audio cable to the audio output socket on the Road Tech riser radio, satellite radio or other audio device. Position the clip in the area indicated in Figure 1, and rotate as needed to allow easy insertion and removal of the cable jack and audio output socket. 2 1 is04347 1. For FLHT models 2. For FXD, FXST, FLST, FLHR and FLTR models Figure 1. Clip Location NOTE Ambient temperature should be at least 60 °F (16 °C) for proper adhesion of the clip to the mounting surface. 3. Clean the clip mounting area with a mixture of 50 to 70% isopropyl alcohol and 30 to 50% distilled water. Allow to dry thoroughly. 4. Peel the liner from the adhesive backing of the clip. Carefully position the clip to the mounting surface, and press firmly into place. Hold the clip in position with steady pressure for 30 seconds. Be sure that steering is smooth and free
Read more »

HARLEY DAVIDSON INSTALLATION MANUAL BADLANDER SEAT KIT

Installation User Manual When performing the following procedures, be careful not to scratch painted surfaces (fender, tank, etc.) with metal tabs on seat. 1. Remove existing seat strap from motorcycle. Retain all hardware. Discard seat strap. 2. Remove existing seat from motorcycle by removing Phillips head screw with lockwasher, and nylon washer from rear fender mounting bracket. Retain all hardware except discard nylon washer. 3. Disengage seat from frame tab at front of seat. 4. Install new seat onto motorcycle, making sure bracket on front of seat fully engages into seat mounting tab on frame. NOTE On rear fenders of 1997-1999 models, a captive nut secured with a plastic retention washer has replaced the previously used weld nut. Do not remove the plastic retention washer unless the captive nut is
Read more »

HARLEY DAVIDSON DIAMETER HANDLEBAR KITS INSTALLATION MANUAL CHROME 1.00 INCH (25.4 MM)

The Manual Preparation To prevent accidental vehicle start-up, which could cause death or serious injury, remove main fuse before proceeding. (00251b) 1. Refer to the Service Manual and follow the instructions given to remove the main fuse. 2. For FLTR models only: Refer to UPPER FAIRING AND WINDSHIELD: FLTR: OUTER FAIRING: REMOVAL in the Service Manual, and follow the instructions to remove the outer fairing. See INSTRUMENT NACELLE: FLTR: REMOVAL in the Service Manual, and remove the instrument nacelle and bezel. For ALL models: Direct contact of D.O.T. 4 brake fluid with eyes can cause irritation. Avoid eye contact. In case of eye contact flush
Read more »

MODELS INSTALLATION MOTORCYCLE SERVICE LIFT ADAPTER KIT FOR DYNA TC88

MOTORCYCLE SERVICE LIFT ADAPTER KIT FOR DYNA TC88 MODELS INSTALLATION Installation Manual A Service Manual for your motorcycle is available at your Harley-Davidson Dealer. 1. See Figure 1. Position the motorcycle on a straight and level surface. While the bike rests on the Jiffy Stand, straighten the front wheel and place the frame leveling extrusion under the front tire to keep the tire straight. 2. Slide the motorcycle lift (fully lowered) under the bike from the right side (opposite jiffy stand side) lining up the frame rails with each of the perpendicular jacking rails on the lift. When properly aligned, the left frame rail will be approximately 1? from the lift end section (Figure 2) and lift base will be adjacent to the Jiffy Stand (Figure 3). This will allow bike to be centered when moved to an upright position.


 


 


Read more »

HARLEY DAVIDSON INSTALLATION MANUAL DETACHABLE PASSENGER BACKREST LUGGAGE RACK KIT

User Manua1. See Figure 1. If not already assembled in package, assemble V-logo onto each mounting bracket (2 and 3) using #4-40 thread-forming screws (5). 2. Position luggage rack between sideplates of detachable passenger backrest assembly. 3. Thread button head screws (7) through washers (6), then through holes in luggage rack support and passenger backrest sideplate and into mounting brackets (2 and 3). Apply LOCTITE 243 (Blue) to screws (7) before installation. Finger tighten. 4. Tighten button head screws to 19 ft-lbs (26 Nm) . NOTE The backrest shown in Figure 1 is not included in this kit and must be purchased separately. -J01851 1 of 2 SERVICE PARTS 8 1 7 6 3 2 4 5 is04290 Figure 1. Service Parts: Detachable Passenger Backrest Luggage Rack Kit Table 1. Service Parts Table Part Number Description (Quantity) Item Part Number Description (Quantity) Item 2711 Screw, #4-40 thread-forming, steel, zinc plated (4) 5
Read more »

HARLEY DAVIDSON INSTALLATION MANUAL ROAD KING CLASSIC FRONT FENDER SKIRT

User Manual 1. Remove fasteners from stock fender skirt. NOTE Some early models have rivets for fasteners. These rivets will need to be drilled out. Drill the rivet heads to a sufficient depth to remove the head from the rivet shaft. Do not attempt to drill the rivet all the way through. This may scratch the fender?s painted surface. 2. Remove stock fender skirt. 3. Thoroughly clean the fender under the skirt. At this point it may be a good idea to wax this portion of the fender to prevent rust in the future. 4. See Figure 1. Cut the adhesive foam strip (5) into three equal parts. Remove the backing from the adhesive strips and apply adhesive on middle and two sides at the
Read more »