Monday, February 6, 2012

MODELS INSTALLATION MOTORCYCLE SERVICE LIFT ADAPTER KIT FOR DYNA TC88

MOTORCYCLE SERVICE LIFT ADAPTER KIT FOR DYNA TC88 MODELS INSTALLATION Installation Manual A Service Manual for your motorcycle is available at your Harley-Davidson Dealer. 1. See Figure 1. Position the motorcycle on a straight and level surface. While the bike rests on the Jiffy Stand, straighten the front wheel and place the frame leveling extrusion under the front tire to keep the tire straight. 2. Slide the motorcycle lift (fully lowered) under the bike from the right side (opposite jiffy stand side) lining up the frame rails with each of the perpendicular jacking rails on the lift. When properly aligned, the left frame rail will be approximately 1? from the lift end section (Figure 2) and lift base will be adjacent to the Jiffy Stand (Figure 3). This will allow bike to be centered when moved to an upright position.


 


 


here

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.